Visara CNA-8000 Installation - Manual (Page 93)

CNA-8000 Installation and Configuration
707158-003 7-5
SDLC Drop Panel
By selecting the ‘Drops’ button the following SDLC Drop Configuration panel will
display.
Field Definitions
Configure SDLC Line: This option defaults to the line that you selected. You can
change to a different line to make changes to.
Drop: This defaults to the Drop that you selected, but you can change the configuration
of a different drop if you wish by selecting another drop from the drop down control.
Undefined Drops are ignored. To add a new drop, select the [Add] button at the bottom of
the panel.
Drop ID: This is a text field (alphanumeric plus underscore, dash, and period) that you
can define that will be used in the CNA-8000 panels to allow you to recognize individual
drops better.
Address: This is the hex value (01-FE) that will be used to poll the platform identified
by this Drop. The value entered on this panel must match the configuration of the
platform that is represented by this drop.