Visara CNA-8000 Installation User Manual
Page 99
CNA-8000 Installation and Configuration
707158-003
8-3
Dynamic DLSW: Selecting this control will cause only dynamic DLSw Drops
associated with the network adapter configured for the indicated XCA Subchannel to
display as options.
Predefined LLC: Selecting this control will cause only predefined LLC Drops
associated with the network adapter configured for the indicated XCA Subchannel to
display as options.
Dynamic LLC: Selecting this control will cause only dynamic LLC Drops associated
with the network adapter configured for the indicated XCA Subchannel to display as
options.
SDLC: Selecting this control will cause only SDLC Drops to display as options.
Enabling SDLC will cause the Virtual MAC Address and Virtual SAP fields to become
enabled.
Virtual MAC Address: This address is used by SDLC destinations when
communicating with VTAM since connections through an XCA gateway are expected to
be LAN attached devices. Traffic to and from the SDLC node are made to appear to be
directed to and from the MAC address from the perspective of VTAM.
Virtual SAP: Like the Virtual MAC Address, a node that is being addressed through an
XCA gateway requires a SAP to identify the service access point to which the traffic
must be directed. For SDLC nodes this Virtual SAP serves the purpose.
Force 2-stage pacing in BIND: When checked, BINDs passing through this gateway
circuit will be monitored, and the appropriate bit to force 2-stage pacing will be
overlayed onto the BIND before sending it on. Left unchecked, BINDs will be passed
through to the clients as sent by the host.