ACTi IP Utility V4.3.03 - Manual (Page 8)

www.acti.com
IP Utility User’s Manual 4.3.03
8
Status Message:
● The device IP address has conflict with another devices → Ip address conflict.
● This device is added manually → this device was added manually.
● Fail in authentication for querying device information → Wrong account/password.
Configuration Status
Each time you apply settings to devices with global settings, the status column would display the
result. For example, if you reboot a camera, its status would appear as “ Rebooting ” during the
process, and turns to “ Success in save&reboot device ” when finished. On the other hand, if the
configuration fails, the status would show “ Fail to save & reboot device ”.