H3C Technologies H3C S12500X-AF Series Switches User Manual
Page 13
9
Attaching the LSVM1BSR10 slide rails (for the S12504X-AF
switch)
1.
Read signs on the slide rails to avoid making a mistake.
Figure 10 Right slide rail
(1) Sign
(2) Guide rail
(3) Ventilation holes
(4) Installation hole
2.
Mark the installation position on the rack posts for the slide rails:
a.
Insert the positioning tab at the bottom of a slide rail into the lowest square hole within the 2U
space on a rack post.
Ensure that the installation holes on the slide rail are aligned with the square holes in the rack
post, as shown in
.
b.
Each rack post requires four screws to attach the slide rail. Mark the uppermost square hole
and lowermost square hole for installation on the rack post.
c.
Mark the square holes at the same height on the other three rack posts.