H3C Technologies H3C S12500X-AF Series Switches - Manual (Page 20)

16
For the S12516X-AF and S12508X-AF switches, the name plate on the upper right corner of the
front panel covers two mounting screw holes on the mounting brackets. Screws are not needed
for these two mounting holes.
If the mounting holes in the mounting brackets cannot align with the cage nuts on the rack, verify
the following items:
{
The bottom edge of the slide rail aligns with the middle of the narrower metal area between
holes.
{
The cage nuts are installed in the correct holes.
Figure 18 Mounting the S12508X-AF/ S12516X-AF switch in the rack
(1) Chassis handle (2) Slide the chassis into the rack
(3) Use screws to secure the mounting brackets to the rack
2
1
3
3