H3C Technologies H3C S12500X-AF Series Switches - Manual (Page 46)

42
Routing power cords
When you route power cords, take consideration of the layout of the equipment room, including the
locations of the power distribution cabinet, AC power receptacles, and lightning protection box. Place
all re-connecting facilities, such as receptacles, at the rack bottom (Do not place them at a location out
of the rack and easy to reach.)
The power modules of the switch are located at the two sides of the rear panel. H3C recommends that
you route power cords from left and right sides of the switch.
Figure 42 Routing power cords (S12516X-AF switch)