H3C Technologies H3C S12500X-AF Series Switches - Manual (Page 29)

25
6. Push the ejector levers inward until they come in close contact with the panel. See callout 3
in Figure 26 .
7. Fasten the captive screws to secure the LPU to the interface module adapter. See callout 4
in
Figure 26 .
Figure 25 Removing an S12500-X LPU from the protection box
(1) Loosen the captive screws that secure the LPU to the protection box (2) Pull the ejector levers outward
(3) Pull the LPU out of the protection box