Installing s12500x-af lpus, Figure 26 – H3C Technologies H3C S12500X-AF Series Switches User Manual
Page 30
Advertising
26
Figure 26 Installing an S12500-X LPU (S12516X-AF switch)
(1) Push the LPU slowly along the guide rails into the slot
(2) Pull the ejector levers outward
(3) Press the ejector levers inward
(4) Fasten the captive screws
Installing S12500X-AF LPUs
The S12500X-AF LPU ejector levers and the ejector lever seats on the LPU slots have purple marks.
To install an S12500X-AF LPU:
1.
As shown by callout 1 in
, remove the filler panel from the target LPU slot. See callout 1
in
Keep the removed filler panel secure for future use.
Advertising