H3C Technologies H3C MSR 50 - Manual (Page 13)

4
Step Command
26. Configure IP performance.
• ip forward-broadcast
• tcp mss
27. Configure policy-based routing. ip policy-based-route
28. Configure UDP helper. udp-helper server
29. Configure URPF. ip urpf
30. Configure fast forwarding. ip fast-forwarding
31. Configure basic IPv6 settings.
• ipv6 address
• ipv6 address auto link-local
• ipv6 mtu
• ipv6 nd autoconfig managed-address-flag
• ipv6 nd autoconfig other-flag
• ipv6 nd dad attempts
• ipv6 nd ns retrans-timer
• ipv6 nd nud reachable-time
• ipv6 nd ra halt
• ipv6 nd ra interval
• ipv6 nd ra prefix
• ipv6 nd ra router-lifetime
• ipv6 neighbors max-learning-num
• ipv6 policy-based-route
32. Configure NAT-PT. natpt enable
33. Configure IS-IS.
• isis authentication-mode
• isis circuit-level
• isis circuit-type p2p
• isis cost
• isis dis-name
• isis dis-priority
• isis enable
• isis mesh-group
• isis small-hello
• isis timer csnp
• isis timer hello
• isis timer holding-multiplier
• isis timer lsp
• isis timer retransmit
• isis silent