H3C Technologies H3C MSR 50 - Manual (Page 22)

13
Step Command Remarks
54. Enter system view. system-view N/A
55. Specify the global country
code.
wlan country-code code
By default, the country code for
North American models is US, and
for other models is CN.
Configuring a WLAN service template
Creating a service template and specifying an SSID
Step Command Remarks
56. Enter system view. system-view N/A
57. Create a WLAN service
template and enter WLAN
service template view.
wlan service-template
service-template-number { clear |
crypto }
You cannot change an existing
service template to another type.
58. Specify the service set
identifier.
ssid ssid-name N/A
59. Disable the advertising of
SSID in beacon frames.
beacon ssid-hide
Optional.
By default, the SSID is advertised in
beacon frames.
Configuring secure access
WLAN access can be secured by client authentication and data encryption. Client authentication makes
sure only authorized users can access the WLAN and data encryption makes sure the data sent can only
be received by specific users.
Client authentication includes 802.1X, PSK, and MAC authentication. Data encryption methods include
WEP, TKIP, and CCMP.
For more information about WLAN security and port security, see "Configuring WLAN security." For
more information about port security, see Security Configuration Guide.
To configure secure access:
Step Command Remarks
60. Enter system view. system-view N/A
61. Create a WLAN service
template and enter WLAN
service template view.
wlan service-template
service-template-number { clear |
crypto }
You cannot change an existing
service template to another type.
62. Configure an authentication
method.
authentication-method
{ open-system | shared-key }
By default, the open-system
authentication method is used.
For more information about the
command, see WLAN Command
Reference.