H3C Technologies H3C MSR 50 - Manual (Page 21)

12
Figure 5 Network diagram
For an AP with two radios, you can configure one radio as a workgroup bridge and configure the other
radio to provide normal access services.
As shown in
Figure 6 , Radio 1 operates as a workgroup bridge, and Radio 2 provides normal access
services. Clients associated with Radio 2 can access the network through the workgroup bridge Radio 1.
Figure 6 Dual-radio AP in workgroup bridge mode
WLAN access configuration task list
Task Description
Specifying a country code Required.
Configuring a WLAN service template Required.
Configuring WLAN parameters Optional.
Configuring radio parameters Required.
Specifying a country code
A country code identifies the country in which you want to operate radios. It determines characteristics
such as operating power level and total number of channels available for the transmission of frames. Set
the valid country code or area code before configuring an AP.
The country code for North American models cannot be modified and that for other models can be
modified at the CLI.
To specify the country code:
AP
Workgroup Bridge
LAN Segment
Hub
PC
Printer
Client
AP
Workgroup Bridge
Client
Radio 1
Radio 2