H3C Technologies H3C MSR 50 - Manual (Page 16)

7
Step Command
Configure IPv6 PIM
• pim ipv6 bsr-boundary
• pim ipv6 hello-option
• pim ipv6 holdtime
• pim ipv6 require-genid
• pim ipv6 sm
• pim ipv6 dm
• pim ipv6 state-refresh-capable
• pim ipv6 timer graft-retry
• pim ipv6 timer hello
• pim ipv6 timer join-prune
• pim ipv6 triggered-hello-delay
44. Configure
QoS.
Configure traffic policing,
traffic shaping, and line rate
• qos car
• qos gts any cir
• qos gts acl
Apply a QoS policy qos apply policy
Configure congestion
avoidance
qos max-bandwidth
45. Configure firewall.
• firewall ethernet-frame-filter
• firewall packet-filter
• firewall packet-filter ipv6
• firewall aspf
46. Configure NAT.
• nat outbound
• nat outbound static
• nat server
47. Configure Portal.
• portal auth-network
• portal server
48. Configure IPsec. ipsec policy
49. Configure the backup center.
• standby interface
• standby threshold
• standby timer delay
• standby timer flow-check
• standby bandwidth
50. Configure NetStream. ip netstream
51. Configure NTP.
• ntp-service broadcast-client
• ntp-service broadcast-server
• ntp-service multicast-client
• ntp-service multicast-server
• ntp-service in-interface disable
52. Configure IPX. ipx encapsulation