Priority mapping configuration tasks, Configuring a priority mapping table – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 32
23
Port priority Local
precedence (lp)
2 2
3 3
4 4
5 5
6 6
7 7
Table 6 The default lp-dscp priority mapping table
Local precedence (lp) DSCP
0 0
1 8
2 16
3 24
4 32
5 40
6 48
7 56
Priority mapping configuration tasks
You can configure priority mapping in any of the following approaches:
•
Configuring priority trust mode.
In this approach, you can configure a port to look up a certain priority, 802.1p for example, in
incoming packets, in the priority mapping tables. If no packet priority is trusted, the port priority of
the incoming port is used.
•
Changing port priority.
By default, all ports are assigned the port priority of zero. By changing the port priority of a port,
you change the priority of the incoming packets on the port.
Perform these tasks to configure priority mapping:
Task Remarks
Configuring a priority mapping table
Optional
Configuring a port to trust packet priority for priority mapping
Optional
Changing the port priority of an interface
Optional
Configuring a priority mapping table
The device provides the following types of uncolored priority mapping table.