Verifying the configuration – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 38
29
[AC-WLAN-ESS2] qos priority 3
[AC-WLAN-ESS2] quit
# Disable service template 2 before binding it with interface WLAN-ESS 2.
[AC] wlan service-template 2
[AC-wlan-st-2] service-template disable
[AC-wlan-st-2] ssid office2
[AC-wlan-st-2] bind wlan-ess 2
# Enable service template 2.
[AC-wlan-st-2] service-template enable
[AC-wlan-st-2] quit
# Configure the WLAN-ESS 3 as 5.
[AC] interface WLAN-ESS 3
[AC-WLAN-ESS3] qos priority 5
[AC-WLAN-ESS3] quit
# Disable service template 3 before binding it with interface WLAN-ESS 3.
[AC] wlan service-template 3
[AC-wlan-st-3] service-template disable
[AC-wlan-st-3] ssid office3
[AC-wlan-st-3] bind wlan-ess 3
# Enable service template 3.
[AC-wlan-st-3] service-template enable
[AC-wlan-st-3] quit
Verifying the configuration
Connect a client to each AP. Ping the same PC from the three wireless clients. Capture the packets sent
out interface GigabitEthernet 1/0/1 of the AC, and you can determine the mapped priority of the
packets from each wireless client.