H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 103)

95
[DeviceC] vlan 2
# Disable MAC address learning for VLAN 2.
[DeviceC-vlan2] mac-address mac-learning disable
[DeviceC-vlan2] quit
# Configure VLAN 2 as the remote probe VLAN of the mirroring group and GigabitEthernet1/0/2
as the monitor port of the mirroring group, disable the spanning tree feature on
GigabitEthernet1/0/2, and assign the port to VLAN 2.
[DeviceC] mirroring-group 1 remote-probe vlan 2
[DeviceC] interface gigabitethernet 1/0/2
[DeviceC-GigabitEthernet1/0/2] mirroring-group 1 monitor-port
[DeviceC-GigabitEthernet1/0/2] undo stp enable
[DeviceC-GigabitEthernet1/0/2] port access vlan 2
[DeviceC-GigabitEthernet1/0/2] quit
Verifying the configuration
After the configurations are completed, you can monitor all packets received and sent by the marketing
department on the server.