H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 42

Advertising
background image

34

Reference clock ID: 3.0.1.31

Nominal frequency: 64.0000 Hz

Actual frequency: 64.0000 Hz

Clock precision: 2^7

Clock offset: 0.0000 ms

Root delay: 31.00 ms

Root dispersion: 8.31 ms

Peer dispersion: 34.30 ms

Reference time: 16:01:51.713 UTC Sep 19 2012 (C6D95F6F.B6872B02)

# Display NTP session information for Switch A, which shows that an association has been set up
between Switch A and Switch C.

[SwitchA-Vlan-interface2] display ntp-service sessions

source reference

stra reach poll now offset delay disper

**************************************************************************

[1234] 3.0.1.31 127.127.1.0 3 254 64 62 -16.0 32.0 16.6

note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured

Total associations : 1

# NTP authentication is enabled on Switch B, but not enabled on Switch C, so Switch B cannot
synchronize to Switch C.

[SwitchB-Vlan-interface2] display ntp-service status

Clock status: unsynchronized

Clock stratum: 16

Reference clock ID: none

Nominal frequency: 100.0000 Hz

Actual frequency: 100.0000 Hz

Clock precision: 2^18

Clock offset: 0.0000 ms

Root delay: 0.00 ms

Root dispersion: 0.00 ms

Peer dispersion: 0.00 ms

Reference time: 00:00:00.000 UTC Jan 1 1900(00000000.00000000)

# Enable NTP authentication on Switch C. Configure an NTP authentication key, with the key ID of
88 and key value of 123456. Specify the key as a trusted key.

[SwitchC] ntp-service authentication enable

[SwitchC] ntp-service authentication-keyid 88 authentication-mode md5 123456

[SwitchC] ntp-service reliable authentication-keyid 88

# Specify Switch C as an NTP broadcast server, and associate the key 88 with Switch C.

[SwitchC] interface vlan-interface 2

[SwitchC-Vlan-interface2] ntp-service broadcast-server authentication-keyid 88

# After NTP authentication is enabled on Switch C, Switch B can synchronize to Switch C. Display
NTP service status information on Switch B, and you can see that Switch B has synchronized to

Switch C, the stratum level of Switch B is 4, and the stratum level of Switch C is 3.

[SwitchB-Vlan-interface2] display ntp-service status

Clock status: synchronized

Clock stratum: 4

Reference clock ID: 3.0.1.31

Nominal frequency: 64.0000 Hz

Actual frequency: 64.0000 Hz

Advertising