H3C Technologies H3C WX5500E Series Access Controllers - Manual (Page 83)

75
History group configuration example
Network requirements
Configure the RMON history group on the RMON agent in Figure 29 to gather periodical traffic statistics
for GigabitEthernet 1/0/1 every one minute.
Figure 29 Network diagram
Configuration procedure
# Configure the RMON history group on the RMON agent to gather traffic statistics every one minute for
GigabitEthernet 1/0/1. Retain up to eight records for the interface in the history statistics table.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon history 1 buckets 8 interval 60 owner user1
# Display the history data collected for GigabitEthernet 1/0/1.
[Sysname-GigabitEthernet1/0/1] display rmon history
HistoryControlEntry 2 owned by null is VALID
Samples interface : GigabitEthernet1/0/1<ifIndex.3>
Sampling interval : 10(sec) with 8 buckets max
Sampled values of record 1 :
dropevents : 0 , octets : 834
packets : 8 , broadcast packets : 1
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
Sampled values of record 2 :
dropevents : 0 , octets : 962
packets : 10 , broadcast packets : 3
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0
collisions : 0 , utilization : 0
Sampled values of record 3 :
dropevents : 0 , octets : 830
packets : 8 , broadcast packets : 0
multicast packets : 6 , CRC alignment errors : 0
undersize packets : 0 , oversize packets : 0
fragments : 0 , jabbers : 0