Operation modes, Client/server mode – H3C Technologies H3C WX5500E Series Access Controllers User Manual

Page 19

Advertising
background image

11

Root Delay—Roundtrip delay to the primary reference source.

Root Dispersion—The maximum error of the local clock relative to the primary reference source.

Reference Identifier—Identifier of the particular reference source.

Reference Timestamp—The local time at which the local clock was last set or corrected.

Originate Timestamp—The local time at which the request departed from the client for the service
host.

Receive Timestamp—The local time at which the request arrived at the service host.

Transmit Timestamp—The local time at which the reply departed from the service host for the client.

Authenticator—Authentication information.

Operation modes

Devices that run NTP can implement clock synchronization in one of the following modes:

Client/server mode

Symmetric peers mode

Broadcast mode

Multicast mode

You can select operation modes of NTP as needed. If the IP address of the NTP server or peer is unknown
and many devices in the network need to be synchronized, adopt the broadcast or multicast mode. In the

client/server or symmetric peers mode, a device is synchronized from the specified server or peer, so

clock reliability is enhanced.

Client/server mode

Figure 7 Client/server mode

When operating in client/server mode, a client sends a clock synchronization message to servers with

the Mode field in the message set to 3 (client mode). Upon receiving the message, the servers
automatically operate in server mode and send a reply, with the Mode field in the messages set to 4

(server mode). Upon receiving the replies from the servers, the client performs clock filtering and selection

and synchronizes to the optimal reference source.
In client/server mode, a client can synchronize to a server, but a server cannot synchronize to a client.

Network

Server

Client

Clock

synchronization

message

(Mode3)

Automatically works in

client/server mode and

sends a reply

Reply

( Mode 4)

Performs clock filtering and

selection, and synchronizes its

local clock to that of the

optimal reference source

Advertising