Grass Valley K2 Dyno PA Configuration Manual v.1.0 - Manual (Page 21)

Software requirements
Before installing K2 Dyno PA, verify the software requirements.
K2 Dyno PA
The K2 Dyno PA application has the following software requirements:
Notes Version Software
3.5 SP1 Microsoft .Net
Framework
August 2009 Microsoft DirectX SDK
Needed if using the
Browse feature. Use the version of SNFS software
specified for your version of K2 Summit
7.2.x software. For more information, Quantum SNFS
software
refer to the K2 Release Notes & Upgrade
Instructions for your version of the 7.2.x
software.
K2 Media Client
The K2 Media Client has the following software requirement:
Notes Version Software
The Browse feature
is not supported. 3.3x. For information on configuring the
K2 software, consult the K2 Media Client
documentation. K2 software
K2 Summit Production Client/K2 Solo Media Server
The K2 Summit Production Client/K2 Solo Media Server has the following software
requirements:
Notes Version Software
The Browse feature
is supported. 7.2.7.1330 or higher. For information on
configuring the K2 software, consult the
K2 Summit Production Client
documentation. K2 software
Needed if using the
Browse feature. Use the version of SNFS software
specified for your version of K2 Summit
7.2.x software. For more information, Quantum SNFS
software
refer to the K2 Release Notes & Upgrade
Instructions for your version of the 7.2.x
software.
In addition, the K2 Summit Production Client/K2 Solo Media Server must have the
following:
11 June 2010 K2 Dyno Production Assistant Configuration Manual 21
K2 Dyno PA prerequisites