Grass Valley K2 Dyno PA Configuration Manual v.1.0 - Manual (Page 30)

6. On the menu bar at the top of the window, select Advanced , then Advanced
Settings…
7. On the Adapters and Bindings tab, order adapters as follows:
a) Loopback adapter
b) Control network
c) Media network
8. To close Advanced Settings and accept the changes, click OK .
9. Close the Network Properties window.
10. Proceed to Undoing the DLC server configuration.
Undoing the DLC server configuration
Prerequisites:
• The network adapters need to be ordered as described in Ordering the network
adapters for K2 Dyno PA.
To undo the the DLC server configuration, follow these steps:
1. From the Start menu, select Programs | Stornext File System | Client Configuration .
The SNFS configuration client opens.
2. Click the Properties button.
The Properties dialog box displays.
3. On the Distributed LAN tab, select Disable .
4. Turn write filter on.
5. Reboot the machine.
30 K2 Dyno Production Assistant Configuration Manual 11 June 2010
Configuring the K2 Summit system for K2 Dyno PA