Grass Valley K2 Dyno v.1.6 - Manual (Page 115)

15 April 2010 K2 Dyno Controller User Manual 115
Checking the transfer progress
• "STATUS" column shows the transfer progress.
- "Transferring" is displayed during a transfer. When transferring is complete, the
item is removed from the list.
- When the transfer progress is canceled, "Aborted" is displayed.
- When the transfer progress is failed because of an error, "Failed" is displayed.
- When the item cannot be transferred because the transfer setting has a problem,
"Invalid" is displayed. Check the setting of the File Type (container format) for
items and the transfer destination. For more information, see
"Setting the T-Bar"
on page 174 and "Setting a destination" on page 176 .
• In the "SRC DEST" column, each first line shows the pass of the transfer source,
file name as well as the camera angle, and each second line shows the pass of
transfer destination. A progress bar will show the progress during a transfer.
• The "DATE" column shows the date when the transfer was performed.