Grass Valley K2 Media Client Service Manual v.3.3 - Manual (Page 151)

June 25, 2009 K2 Media Client Service Manual 151
CPU motherboard replacement
from the Type I motherboard. Install these adapters in rear panel slots 1 and 7.
Refer to the appropriate procedure earlier in this chapter.
7. Install remaining components.
8. When you install the HD-00 codec board, connect the small end of the power cable
adapter to the codec board.
9. Install the top cover.
10.Refer to the checklist at the beginning of this section for the remaining steps to
complete the motherboard replacement process.