Grass Valley K2 Media Client Service Manual v.3.3 - Manual (Page 63)

June 25, 2009 K2 Media Client Service Manual 63
Create the Control Team
b. Select the Settings tab.
c. Click Modify Team . A dialog box opens.
10.On the Adapters tab, do the following:
a. Select the top entry, which is Intel® PRO/1000 MT Dual Port Server Adapter (Type
I MB) or Intel® PRO/1000 EB Network Connection with I/O Acceleration (Type II
and Type III MB), and click Set Primary .
b. Select Intel® PRO/1000 MT Dual Port Server Adapter #3 (Type I MB) or Intel®
PRO/1000 MT Dual Port Server Adapter (Type II and Type III MB) and click Set
Secondary .
11. Click Name tab and rename to Control Team.
12. Click OK and OK and to close dialog boxes.
13. Do not create a media team for the media (iSCSI) network. The two remaining
connections remain as independent ports and are used as follows:
• Media Connection #1, which is GigE port 2 on the K2 Media Client rear panel,
is the connection for the media (iSCSI) network on a non-redundant K2 Storage
System, or for the “A” media (iSCSI) network on a redundant K2 Storage
System.
• Media Connection #2, which is GigE port 4 on the K2 Media Client rear panel,
is not used on a non-redundant K2 Storage System. It is the connection for the
“B” media (iSCSI) network on a redundant K2 Storage System.
14. Restart the K2 Media Client.
Continue with the “Name team” on page 66 .
Create the Control Team on systems shipping after 3.2.5x
Use this procedure if the K2 Media Client shipped from Grass Valley after release
3.2.5x in the Fall of 2007.
1. In Device Manager, right-click …MT Dual Port Server Adapter (Type I MB) or …EB
Network Connection… (Type II and Type III MB) and select Properties . The
Properties dialog box opens.
2. Select the Teaming tab.