Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 131)

June 5, 2009 K2 Media Client User Manual 131
Working with assets
If the Rename button is not displayed in the Clips pane, refer to assignable
buttons
in “Guide to using the Clips pane” on page 120 .
The Rename dialog box appears.
3. Edit the asset name, then click OK .
Asset names can contain up to 32 characters, including spaces. Spaces count as two
characters, and the following characters are not allowed: \ (backward slash), /
(forward slash), : (colon), * (asterisk), ? (question mark), < (less than), >(greater
than), and | (pipe) as well as
" (double quote), and ~ (tilde) at the beginning of the
name.
The renamed asset is not automatically re-sorted.
NOTE: Assets that are locked or in use cannot be renamed.
Selecting multiple assets
You can select multiple assets in the Clips pane as follows:
• Select Clips | Select All .
• Using mouse and keyboard, hold the SHIFT or CTRL key on the keyboard while
selecting multiple assets with the mouse or arrow keys.
Moving an asset to another bin
There are two ways to move an asset to another bin: Using Cut/Paste or the Send To
dialog box.
Using the cut and paste commands
1. Select the asset(s) in the asset list.
2. Cut the asset to the clipboard using one of the following:
• Select Cut in the asset context menu, or
• Select Edit in the AppCenter main menu, then choose Cut .
• Use keyboard shortcut Ctrl + X .
3. Change the current bin to the target bin. (Refer to “Changing current (working)
bin.” on page 128 .)
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Cut.
NOTE: If an asset is locked or currently being recorded, it remains in the existing
bin while the remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the Asset List.
2. To open the Send To dialog box using do one of following:
• Select Clips | Send To , or
• Select Send To in the asset context menu, or