Grass Valley K2 Media Client User Manual v3.3 - Manual (Page 83)

June 5, 2009 K2 Media Client User Manual 83
Editing a clip
Adjusting clip audio level
The audio meter display provides audio level adjustment for clips loaded in the player
display. Saved audio levels are used every time the clip is loaded and played. Unsaved
changes are lost when the clip is ejected.
To adjust audio level:
1. In the Player application, click the Meter bar button .
2. Adjust the audio level in one of the following ways:
• Adjust the graphical faders individually or “ganged,” which ensures all channels
use the same gain.
• Click Unity to set audio back to the last saved level.
3. Click Save to save changes to the clip audio level.
4. Click the Meter bar button again to return to the Player application.
Changing the clip thumbnail image
The clip thumbnail is displayed in AppCenter for visual identification of the clip. By
default, the 16th frame is used to generate the thumbnail image.
To change the clip thumbnail:
1. While monitoring the play channel output, use the onscreen transport controls to
position the clip to the desired video frame.
2. In Player, click on the thumbnail, then select Yes in the Change Thumbnail dialog
box.
NOTE: If clip marks are edited so that the video frame used to generate the
thumbnail is outside the new clip marks, the thumbnail is reset to a position near
the mark-in of the modified clip.
To reset the thumbnail: