Grass Valley Karrera Video Production Center v.4.0 - Manual (Page 162)

162 KARRERA — User Manual
Section 5 — Device Control
Clip Directory (AMP Protocol)
On the Devices Control menu, touching a Preset Clip or Program Clip data pad
brings up a menu from which you can select the desired folder and then
choose a clip in that folder to load for playback (
Figure 76 ). A similar menu
is used with the Clip Browser on the Devices Event List menu, and for
loading clips in the Timeline Events menu.
If you change a clip locally on the Summit/Solo server, that clip name will
be updated on the Karrera Devices menus. If the folder list or clip list are
incomplete, re-enabling the device will fetch the entire folder and clip list.
Note Do not create file or folder names that have the pound character ( # ) along
with either the dash ( - ) or underscore ( _ ) character, and avoid blank spaces
(for example, use “DeadEnd” not “Dead End”. This can inhibit clip access.
Note A maximum of 20 folders is recommended along with a maximum of 20 clips
per folder.
Figure 76. Folder and Clip Selection Menu
Timeline Event Information and Work Buffer Values
The Device Summaries and Current Device data pads update to show the current
state of the work buffer. This indicates two things. First, it shows what
events exist on each keyframe as it is encountered during effect run or time
cursor navigation. Second, it shows what events will be added to the time-