Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 263)

Kayenne XL Package — User Manual 261
Multi Function Control
Disabling single Controls or a Whole Module
Press and hold down the Lock button. While this button is hold down only
disabled controls are high tallied. Now you can press the buttons which
should be disabled (to re-enable a button press it again).
Note At the first time, all buttons will be dark!
To disable/re-enable a whole module you can hold down any button of the
desired module for 1 second.
Note Keep in mind that all controls (fader, knobs, jog-wheels, buttons, etc.) of the
module will be disabled!
To disable faders you have to hold the Lock button down and move the
fader to top (and to bottom to re-enable it).
To disable knobs or jog wheels you have to hold down the Lock button and
turn right (turn left for re-enable) the knob or jog wheel.
To lock the now selected buttons release the Lock button and press the
Enable (Enbl) button that the lock becomes active. For a quick enable of the
whole panel just press the Enbl button again.
The lock mechanism does not work for the MFM module. To disable the
MFM module you have to press the Self Lock (SLck) button in MFM
module.
Note The lock enable state is not stored! It is always disabled after reset or appli-
cation load.