Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 481)

Kayenne XL Package — User Manual 479
Color Correction Menu
The Adjustment Mode pad has two buttons, the first two, Gain/Lift and White/
Black , determine the mode for the knobs and the text boxes in the Color Cor-
rector Transfer Function pane Red/Green/Blue
Figure 388. RGB Input Correction Adjust Mode
• Gain/Lift: Adjust offset to Black level.
• White/Black: Adjust Black and White by percentage.
When one of the Red , Green , or Blue color component's button is selected, the
knobs for Gain, Lift, and Gamma are delegated for the specific component.
For example, if Green had been selected, the knobs would control the green
channel's values, and similarly for Red and Blue.
The Changes on red also apply to pane has two on/off buttons. The title and the
button labels are dependent on the selection of the color component in the
Color Corrector Transfer Function pane
Red/Green/Blue . If the user selects
Blue as the color to be adjusted, the two buttons are Red and Green . When
these buttons are active, the adjustments applied to the originally selected
color component is also applied to the one(s) selected in the pane. For
example, if the user chooses to adjust Blue and selects Red in the
Changes on
Blue also apply to pane, then any adjustments to Blue's Gamma value will be
applied to Red's Gamma value.
Note Changing from Blue to either Green or Red in the Color Corrector Transfer
Function pane will cancel the attachment.
Figure 389. RGB Input Correction Reset
When the Reset button is touched, the following modes can be selected:
• Reset Red/ Green/ Blue
• Reset Input
• Reset All Inputs