Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 324)

322 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
Special Machine Control Options - VDCP Protocol
• VTR 1 – 4: Use these options to select the disk servers local video ports.
• Cue mode: by jog command, default cue 
When a clip is cued (Go To Timecode, Go To MarkIn/MarkOut), most disk
servers are (re)initializing their local video port. While initializing the
port, the signal is switched to black for a short time. After cuing is com-
pleted, it is usually not possible to play the clip to a timecode position
less than the cueing timecode. The Cue Mode options by jog command
prevents the disk server from (re)initializing the local video port.
Figure 258. Install E-Box Machine Control Special Options for VDCP
Note Not all disk servers are supporting this option.
• Clip names: long names, short names
• To select and activate clips with more than 8 character length, the
option long names can be used. This option requires that the disk server
also supports long clip names. The default setting short names should
be supported by every disk server.
Special Machine Control Options - ODETICS Protocol
• Clip select: mode1 (cue up), default (in preset) 
If clip selection with ODETICS doesn’t work on default, use the mode 1
(cue up) option.
• Show duration: supported, not supported 
If the connected disk server supports an ODETICS protocol variant that
supports clip duration requests, use the option supported.