Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 480)

478 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
RGB Input Submenu
RGB Input Color Correction is a software enabled feature that converts the
video signal on a particular video bus from color difference format to RGB
(red, green, blue) color component format, applies separate offset, gain,
and gamma to each RGB component, then converts from RGB back to color
difference (Y, Cb, Cr) format. The color correction is applied on an input by
input basis. The parameters are applied on the basis of a source and bus
intersection and stored as part of source memory. A different input on the
same bus or a same input on a different bus, may have different color cor-
rection.
The Color Corrector menu is used to adjust RGB color on a selected bus and
input.
Corrected inputs and parameters will be displayed in a yellow style.
Note In the source displays corrected buses or inputs are marked with an under-
line!
Figure 387. RGB Input Correction