Grass Valley LDK 8000 v.2.0 - Manual (Page 41)

v2.0
LDK 8000 User’s Guide | Operating instructions 5-1
Chapter 5
Operating instructions
5.1 Using the camera
Attach lens, viewfinder, microphone and any other accessories to the camera. Attach the triax
cable or supply the adapter with power.
5.1.1 Switching on the power
1. On the Base Station set the master power switch to the on position (I). The green power
light lights.
2. Set the camera Power switch of the camera to the on position .
3. Allow a few moments for the camera to perform a self-test and for the system to
establish communications.
☞
Note
To switch the camera to stand-by, set the Power switch of the camera to the position.
5.1.2 Controlling the camera
There are several ways of controlling the camera:
• Using an OCP connected to the Base Station.
• Using the switches on the camera itself.
• Using the menu system to select functions.
☞
Note
If you cannot access some camera functions or you wish to restrict access, refer to
Section 5.11 on page 29 .