Grass Valley LDK 8000 v.2.0 - Manual (Page 63)

v2.0
LDK 8000 User’s Guide | Operating instructions 5-23
5.8.2 Selecting monitoring signals
Viewfinder display signal
The viewfinder can display local or external video signals. Two switches determine the signal
that is displayed in the viewfinder. The selection made with these switches also determines
the VF connector output. Viewfinder display signal switch:
– Set to LOC to display the local camera Y signal in the viewfinder.
– Set to MIX to display a mix of the local camera Y signal and external signal.
– Set the switch to EXT to display the external signal 1 or 2.
The external signal selection switch determines which external signal from the Base Station,
either EXT1 or EXT 2, is displayed in the viewfinder.
Figure 5-10. Viewfinder signal display switches
Output monitoring signal
The monitoring output selection switch determines the signal available at the VF output
connector. The output can be switched between:
– VF: the analog viewfinder signal (Y only),
– Ext SD: the external signal from the base station (SD-format, CVBS). or
– Ext HD: the scaled external signal from the base station (HD-format, Y only).
Figure 5-11. VF output connector signal
Viewfinder
display signal
External signal
selection switch
Eng
Off
Prod
Front
Rear
VF
Ext1
Ext2
Loc
Mix
Ext
Eng
Off
Prod
Front
Rear
VF output connector
signal selection
VF output connector
Mic.
Mic.
Line
Line
Ext. SD
Ext.
HD VF
Front Rear
VF
Mic.
Mic.
Line
Line
Front Rear