4 install menu contents – Grass Valley LDK 8000 v.2.0 User Manual

Page 85

Advertising
background image

v2.0

LDK 8000 User’s Guide | Menu structure and contents

6-13

6.2.4

Install menu contents

MENU

VALUES

DESCRIPTION

LEVEL

FILE

Video mode

Available modes (1080i59)

Select a video acquisition mode (Available
modes depend on the camera version. See

Section 5.4 on page 6

).

3

-

HD Aspect Ratio

16:9, Wide

Select the aspect ratio.

2

IR receiver

Off, On

Enable or disable the remote control IR receiver
on the camera.

0

Op.

Tally Hand grip (2”)

On, Switch

Set to On so that the tally light at the rear of the
hand grip follows the tally signal; set to Switch
to allow it to be switched off with the switch on
the 2” viewfinder.

0

On-air Lamp (7”)

Off, On

Set to On so that the tally light at the front of
the 7” viewfinder follows the tally signal; set to
Off if you never want it to light.

0

Op.

Intercom

SideTone

0..99 (50)

Set the level of the sidetone in the camera
operator’s headphones.

1

Op.

Cam.Mic

Off, On, Switch

Set to Switch to allow the intercom routing
switch on the adapter to route the intercom
microphone signal.

1

Op.

Cam.Mic gain

0dB, 40dB

Set gain of camera operator’s intercom
microphone to 0dB or 40dB.

1

Op.

Cam.Mic power

Off, On

+48V phantom power to camera operator’s
intercom microphone.

1

Op.

Cam.Production

Off, Left, Right, Both

Select the camera operator’s ear muff for the
production intercom.

1

Op.

Cam.Engeneering

Off, Left, Right, Both

Select the camera operator’s ear muff for the
engineering intercom.

1

Op.

Cam.Program

Off, Left, Right, Both

Select the camera operator’s ear muff for the
program audio.

1

Op.

Cam.Track

Off, Left, Right, Both

Select the camera operator’s ear muff for the
tracker intercom.

1

Op.

Cam.Track level

0..99 (50)

Set the level of the tracker signal in the camera
operator’s headphones

1

Op.

Track Mic to

Off, Cam, Eng, Prod, All

Select the tracker microphone routing.

1

Op.

Track Mic gain

0dB, 40dB

Set gain of tracker’s microphone to 0dB or 40dB

1

Op.

Track Mic Power

On, Off

+48V phantom power to tracker’s microphone

1

Op.

Track Source

Side, Eng

Select engineering intercom or tracker’s
microphone sidetone for tracker’s headphone.

1

Op.

Cam. Mic to

CH1, CH2

1

Op.

Audio

1

Op.

Audio1 Gain

-22dB, -28dB, -34dB,
-40dB, -46dB, -52dB,
-58dB, -64dB
+6db, 0dB, -6dB, -12dB, -
18dB, -24dB, -30dB, -34dB

Set gain of Audio 1 channel for mic. input.

Set gain of Audio 1 channel for line input.

1

Op.

Advertising