Polaris 2000 Victory Special Edition - Manual (Page 25)

18
CONTROL PARTS AND FUNCTIONS
Indicator Lights
1. Turn Indicator Light - flashes when the turn switch is moved to the left or right.
NOTE: A failed turn signal bulb will cause the turn signal indicator to flash at
a high rate of speed (i.e. greater than twice the normal frequency). If this is
observed by the operator, he/she should immediately inspect the function of
the turn signals and correct any possible problems.
WARNING: Failure to fix faulty turn signal bulbs could result in another driver
not seeing you and striking you, causing serious injury or death.
2. Neutral indicator light “N” - comes on when the transmission is in neutral.
3. High beam Indicator light - comes on when the headlight high beam is used.
4. Low oil pressure indicator light - comes on if the oil pressure is low.
5. Fuel level indicator light - comes on when the fuel level is low.
6. Tachometer - indicates engine rpm
7. Speedometer - indicates vehicle speed in mph or kph
1
2
3
4
5
1
6
7