Polaris 2000 Victory Special Edition - Manual (Page 30)

23
PRE-RIDE INSPECTION
WARNING: Failure to perform a proper pre-ride inspection could lead to seri-
ous injury or death. A Pre-Ride Inspection should be made before each use.
No. ITEM PROCEDURE PAGE
1 Engine Oil Check level, add oil if necessary 25
2 Fuel Check level, add fuel if neces-
sary
24
3 Front & Rear Brakes Check fluid level and check for
leaks. Inspect wear indicator on
brake pads. Verify operation.
26
4 Clutch Check operation, adjust if nec-
essary.
27
5 Drive Belt Check tension. Check for wear
and damage.
6 Tires Check pressure and wear.
Check for damage.
28
7 Throttle Operation Check for smooth operation and
proper return.
27
8 Lights, signals, and
switches
Check for proper operation 27
9 Fittings & fasteners Check all chassis fittings and
fasteners.
27
WARNING: If any item in the Pre-Operation check is found to be in need of
repair, have it inspected and repaired before operating the motorcycle.
The engine and exhaust system will be very hot after operating the motorcycle. Be
careful not to touch any of these components or allow any clothing item to contact
them during your inspection.