Polaris 2000 Victory Special Edition - Manual (Page 31)

24
PRE-RIDE INSPECTION
Fuel Cap
Make sure there is sufficient fuel
in the fuel tank.
Grasp the fuel cap (1) and turn
it counter-clockwise to remove
it.
To install the fuel cap, place the
fuel cap in position and turn it
clockwise until it ratchets. Do
not turn the fuel cap counter-
clockwise to align the Victory
logo. This may cause the fuel
cap to loosen during operation.
WARNING: Do not overfill the fuel tank. Avoid spilling fuel on a hot engine. Do
not fill the fuel tank above the bottom of the filler tube as shown in the illustration
or it may overflow when the fuel heats up and expands.
WARNING: Be sure the fuel cap is properly installed before riding the motorcycle.
1