Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 18)

18
Connect your audio system
Using a Master Link cable, connect the MASTER
LINK sockets on the television and the audio
system.
Option setting
If your television has been set up in an AV system,
you may need to set it to the correct Option.
Switch the entire system to standby.
Option setting for the television
> While holding the • button on Beo4, press
LIST.
> Let go of both buttons.
> Press
LIST repeatedly to display OPTION? on
Beo4 and press GO.
> Press LIST repeatedly to display V.OPT on Beo4
and then key in the appropriate number ( 1 or 2).
Option setting for the audio system
> Repeat the procedure as described above.
> Press
LIST repeatedly to display A.OPT on Beo4
and then key in the appropriate number ( 0, 1, 2,
5 or 6).
In one room – all speakers are connected to the
television.
The television and audio system in the same room.
Audio system in one room, and the tele vision in
another.
Connect and operate an audio system
If your television is equipped with the
optional System Module and you
connect a compatible audio system,
you obtain the benefits of an
integrated audio/video system.
Play a CD on your audio system using
the television speakers, or switch on
a TV programme and send the sound
to your audio system speakers.
Your AV system can be placed
together in one room or in two
rooms with the television placed in
one room, and the audio system with
a set of speakers placed in another.
Not all Bang & Olufsen audio systems
support integration with the television.
Option 2 Option 0
Option 1 Option 1
Option 2 Option 2