Maintenance, Changing the beo4 batteries, Cleaning – Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) User Manual

Page 53

Advertising
background image

53

Maintenance

Regular maintenance, such as cleaning

the television, is the responsibility of
the user. To achieve the best result,
follow the instructions to the right.
Contact your Bang & Olufsen retailer
to determine recommendations for

regular maintenance.

Changing the Beo4 batteries

When BATTERY appears in the Beo4 display,
it is time to change the batteries in the
remote control.

The Beo4 requires three batteries. We

recommend that you use Alkaline batteries
only (1.5 V – size AAA). Replace the batteries
as shown on this page. Keep a finger on top
of the batteries until the lid is replaced.

When you have replaced the batteries, wait
about 10 seconds until TV appears in the
display. The Beo4 remote control is then
ready for use.

Do not expose batteries to excessive heat such as
sunshine, fire or the like!

Cleaning

Never use alcohol or other solvents to clean
any part of the television, stand or wall

bracket!

Cabinet surfaces
Wipe dust off the surfaces using a dry, soft
cloth. Remove grease stains or persistent dirt
with a soft, lint-free, firmly wrung cloth,
dipped in a solution of water containing only
a few drops of mild detergent, such as
washing-up liquid.

The speaker cover may also be cleaned with a

soft brush mounted on a vacuum cleaner, set
to the lowest level.

Picture screen

To clean the picture screen, use a mild

window cleaning fluid (not containing
alcohol). To retain the optimum performance
of the screen, make sure that no streaks or
traces of the cleaning fluid are left on the
screen.

Beo4
Wipe the Beo4 remote control with a soft,
lint-free, firmly wrung cloth.

1

2

3

1

2

Advertising