Sound adjustments, 43 sound adjustments – Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) User Manual

Page 43

Advertising
background image

43

Sound adjustments

Sound settings are preset at the factory to
neutral values which suit most listening
situations. However, if you wish, you can
adjust these settings to your liking.

You can preset levels for sound volume, bass,

treble and a connected BeoLab subwoofer.

You can switch the loudness feature on or off.
The loudness feature compensates for the

human ear’s lack of sensitivity to high and
low frequencies. These frequencies are
boosted at low volume levels so that low
music becomes more dynamic.

In addition you can preset two default
speaker combinations; one to be used each
time you switch on a video source in your
system, and one to be used each time you
switch on an audio source connected to your
system. You can still select a different speaker
combination any time you wish, refer to page
9 for further information.

> Press

MENU to bring up the TV SETUP menu

and press to highlight SOUND.

> Press

GO to bring up the SOUND menu,

ADJUSTMENT is highlighted already.

> Press

GO to bring up the SOUND ADJUSTMENT

menu.

> Press or to select an item to adjust.
> Press or to adjust the values or choose a

setting.

> Press or to move through menu items.
> Press

EXIT to store your settings until you

switch off your television.

> Press

GO to store your settings permanently.

The contents of the SOUND menu varies according

to what you have connected to the television.

What’s on the SOUND menu …
VOLUME … Adjusts the volume level the TV uses

when you switch it on.

BASS … Adjusts the bass level.

TREBLE … Adjusts the treble level.

SUBWOOFER … (only available if you have

connected a BeoLab subwoofer) Adjusts the
sound level from the subwoofer.

LOUDNESS … Loudness can be set to YES or NO.
DEFAULT VIDEO … Set the speaker combination

you want to use when switching on a video
source in your system. Options are 3 and 5.

DEFAULT AUDIO … Set the speaker combination

you want to use when switching on an audio
source in your system. Options are 2 and 4.
Refer to page 33 for further information on
speaker combinations.

SOUND

store

GO

VOLUME

.......

.

.......

BASS

.......

.

.......

TREBLE

.......

.

.......

LOUDNESS

OFF

DEFAULT VIDEO

3

DEFAULT AUDIO

2

Advertising