Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 29)

29
When you have connected additional video
equipment to your television, you must also
‘tell’ the system what is connected.
What’s on the AV1 – AV4 menu …
SOURCE … Select the source you have connected.
The option you select indicates which remote
control button switches on the source. For
example, a source registered as V.MEM is
switched on when you press the V MEM button.
V.MEM … If you have connected a Bang &
Olufsen video recorder or any other video
recorder.
DVD … If you have connected a DVD player.
DTV … If you have connected a set­top box
registered as DTV.
V.AUX … If you have connected a set­top box
or other equipment registered as V.AUX.
DECODER … If you have connected a decoder.
PC … For a connected PC.
NONE … If no equipment is connected.
IR SOCKET … If the equipment connected to this
socket is controlled via IR, select which socket
the IR controller is connected to; PUC1, PUC2,
PUC3 or PUC4.
HDMI … Indicates whether or not the equipment
is connected to the television via one of the
HDMI sockets. Select the appropriate socket: A
or B.
S/P­DIF … Indicates whether or not the
equipment is connected to the television via
one of the SPDIF sockets. Select the appropriate
socket: 1 or 2.
(YPbPr) … Indicates whether or not the
equipment is connected to the television via the
YPbPr sockets. Options are YES and NO. Only
available in the AV2 and AV3 menus, and can
only be registered in one of these menus at any
time.
(VGA) … Indicates whether or not the equipment
is connected via the VGA socket. Options are
YES and NO. Only available in the AV3 menu.
While it is possible to register your equipment
under any of the available source names, the
names you select affect how you can use your
sources.
Automatic standby …
When you register a set­top box in the
CONNECTIONS menu, you can also select a
‘standby setting’ time for your set­top box. This
means that you can select if the connected set­top
box should switch to standby automatically.
The options are:
OFF AT SOURCE CHANGE … The set­top box is
switched on when selected, and off when
another source is selected.
OFF AT TV STANDBY … The set­top box is switched
on when selected, and off when the television is
switched off.
ALWAYS ON … The set­top box is always on and
never switched off.
MANUAL CONTROL … The set­top box is not
switched on and off automatically. You switch it
on and off manually by means of the Beo4
remote control.
If you have connected a set-top box, you will be
prompted to select your set-top box from an
onscreen list when you select an IR socket in the
CONNECTIONS menu.
If a source is connected to the HDMI socket, some
video functions are affected:
– You cannot distribute sound or picture from a
HD source to a product in a link room, unless
your HD equipment also provides a Standard
Definition (SD) signal
– You cannot record an HD source, unless your HD
equipment also provides a Standard Definition
(SD) signal.
DTV SETUP
select GO
SELECTOR
NOKIA 9800S/025
NOKIA 9602S
NOKIA 9820t
NOKIA 9200
PACE DTR730-IM
NOTE! Contents of the CONNECTIONS menu
depend on whether the television is equipped
with the optional System Module or not.