Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 24)

24
To disable the internal tuner …
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
and press to highlight TUNER SETUP.
> Press GO to bring up the TUNER SETUP menu,
TV TUNER is already highlighted.
> Press or to switch between the setting ON
or OFF.
> Press to highlight DVB HD.
> Press or to switch between the setting ON
or OFF.
> Press GO to store the settings, or …
> … press EXIT to leave all menus without storing.
Important! If you have connected a Bang & Olufsen
hard disc recorder to your television, it is
recommended not to disable the TV tuner.
Tuner setup
You may choose to disable the TV
tuner, if your television source is the
DVB HD or a peripheral unit, such as
a set­top box. If you disable the TV
tuner, you activate DVB HD by means
of the TV button and you can activate
a peripheral unit by means of the
DTV button. If you also disable the
DVB HD tuner, you can activate a
connected peripheral unit acting as
tuner wither either the TV button or
the DTV button.
TUNER SETUP
store GO
TV TUNER ON
DVB HD ON