Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 52)

52
Camera and headphones sockets
You can connect headphones and
listen to a programme, or you can
connect a Camcorder and watch your
home movies on the tele vision. If you
have connected a video recorder, you
can copy Camcorder recordings.
Sockets for temporary connections
PHONES
You can connect stereo headphones to the socket
marked PHONES. Adjusting volume will affect
both the television speakers and the headphones.
Muting sound will affect television speakers only.
– To mute the speakers connected to the
television, press the middle of the button.
– When sound is muted in the speakers, press
or to adjust sound in headphones.
– To restore sound in the speakers, press the
middle of the button.
These sockets are for the connection of a
Camcorder:
R – L
For audio connection (right and left sound channel
respectively).
VIDEO
For the video signal.
Watch digital pictures on your television
To watch your camera pictures, connect the camera
and switch the television on. The tele vision auto­
matically registers the signal and you can see the
still pictures on the screen.
If the signal from the camera is switched off …
> Press
LIST repeatedly to display CAMERA* on
Beo4 and press GO.
*In order to display CAMERA on Beo4, you must
first add it to the Beo4 list of functions. For further
information, refer to the Guide enclosed with Beo4.
Watch and copy from a Camcorder
If you have connected a recorder to your tele vision,
and you connect your Camcorder, you can copy
Camcorder recordings.
To copy a recording from a Camcorder …
> Connect your Camcorder and start playback on
the Camcorder. The television automatically
registers the signal and you can see the pictures
on the television screen.
> Press RECORD twice to start recording.
R
L
VIDEO
PHONES