Magnum Energy Magnum Panel (MP Series) - Manual (Page 13)

Page 6 © 2011 Magnum Energy, Inc.
2.0 Introduction
2.1.4 Physical Features
• MP Dimensions (H x W x D): Each Enclosure = 18” x 13” x 6.75” (45.7cm x 33cm x 17.1cm)
• MP Weight: MPSL = 48 lbs. (21.8 kg), MPSH = 51 lbs. (23.1 kg), MPDH (AC Side) = 44 lbs.
(20 kg), MPDH (D Side) = 46 lbs. (20.7 kg)
• Shipping Dimensions (H x W x D): 26.75” x 17.75” x 14.75” (56.9cm x 38.1cm x 31.8cm)
• Shipping Weight: MPSL = 50 lbs. (22.7 kg), MPSH = 53 lbs. (24 kg), MPDH (AC Side) = 46 lbs.
(20.7 kg), MPDH (D Side) = 48 lbs. (21.8 kg)
2.1.5 Optional Accessories/Components
• ME-RC – Remote Control with LCD display; allows inverter (or connected accessory) to be
confi gured and monitored, and maintains the critical settings in nonvolatile memory.
• ME-ARC – Advanced Remote Control with LCD display; has all the features of the ME-RC remote,
but also confi gures the advanced features of the inverter (or any connected accessory).
• ME-RTR – The ME-RTR, or “router” provides parallel capability for the MS-PAE Series inverters
and includes many of the same features as the ME-ARC advanced remote control. The router
is designed with a user-friendly LCD display and rotary SELECT knob that allows all connected
MS-PAE series inverter/chargers to be programmed in sync without the need to program
each inverter separately. The router will accommodate up to four MS-PAE inverter/chargers
in parallel, plus accessories.
• ME-BMK-NS – Battery Monitor; determines battery State of Charge (DC shunt not included).
• ME-AGS-N – Automatic Generator Start Controller (Network version); automatically starts/
stops generators.
• BP-S – Single Mounting Backplate; for mounting a Magnum inverter and MP/MPX enclosures.
It can be combined with the BP-D for additional mounting surface area. UPS shippable.
• BP-D – Dual Mounting Backplate; for mounting a Magnum inverter and MP/MPX enclosures,
It can be combined with the BP-S for additional mounting surface area. UPS shippable.
• DC Breakers – MP enclosure has space for E-Frame/back-mounted (1” width) or Q-Frame/
DIN rail-mounted (1/2” width) DC breakers (not applicable for the MPSH-30D model).
• MPX Extensions – These enclosures allow additional Magnum inverters to be mounted and
electrically wired to the Magnum Panel to allow an integrated panel system. The top of the
MPX is designed to allow Magnum inverters to fi t seamlessly into the top. The MPX Series
enclosures come with the AC and DC breakers and wiring to install another Magnum inverter.
An inverter hood is also included with each MPX extension to allow the inverter to be mounted
vertically.
• ME-MW-W - The MagWeb Wireless allows Magnum Energy’s inverters and accessories to be
remotely monitored. Installed on the Magnum network, the MagWeb provides live Internet
monitoring of the inverter, battery monitor, and automatic generator start module. Using your
always on Internet connection, the MagWeb makes live and historical conditions available to
you through a web browser at
http://data.magnumenergy.com .
2.2 Regulatory Compliance
The MP enclosure carries the ETL Listed Mark and is designated as Interconnection System
Equipment (ISE) for use with inverters. It has been independently tested and certifi ed by Intertek
Testing Services (known as ETL) to UL 1741, 2nd Edition, and is also CSA certifi ed to C22.2 No.
107.1-01 (R2006). These certifi cations mean the MP enclosure meets the minimum requirements
of prescribed product safety standards.
Note: ETL is a Nationally Recognized Testing Laboratory (NRTL). NRTL’s are qualifi ed organizations
that meet the requirements of Occupational Safety and Health Administration (OSHA) regulations
to perform independent safety testing and product certifi cation.