Magnum Energy Magnum Panel (MP Series) - Manual (Page 15)

Page 8 © 2011 Magnum Energy, Inc.
2.0 Introduction
2
Front Panel Cover - The cover(s) on the front of the MP enclosures can be removed to
access the internal components. The front cover panels are equipped with rectangular
knockouts, to allow additional AC and DC circuit breakers to be installed.
3
MP Side Access Plate (x2) - These access plates (one on each side) allow the power
and communications conductors to be routed from the main MP enclosure to a MPX
extension box (when used).
4
DC Shunt Access Plate - This plate allows access to the DC shunt (for connecting a
battery monitor) and the DC ground stud.
5
Conduit Knockouts - Multiple sized k nockouts on the side and bottom of the MP
enclosure are provided to allow metal and PVC conduits. For dimensions and sizes, see
Figures 3-13 and 3-14.
Figure 2-6, MPDH External Components
3
4
5
1
2