Casio QV-8000SX - Manual (Page 100)

E-100
CONNECTING TO OTHER EQUIPMENT
Connecting to a Computer
The following accessories are included with the camera to
make it easy for you to connect to a computer to transfer and
manage your images.
• USB cable
• USB driver software (on CD-ROM)
• Data Transfer Cable
• Photo Loader application (on CD-ROM)
USB Port Connections
The camera’s USB port and accessories make it easy to
connect to a computer equipped with a USB port. First install
the USB driver software that comes bundled with the camera
on your computer, and then use its special USB cable to
make the connection. Once connected, you can view images
on your computer's display and store images on its hard
disk.
• See the separate installation manual for information about
how to install the driver software on your computer.
System Requirements
Windows
• IBM PC/AT or compatible
computer pre-installed
with Windows 98
• 486 or higher CPU
(Pentium recommended)
• CD-ROM drive (for instal-
lation)
• Keyboard and mouse or
equivalent input device
• Available USB port
* Proper operation is not guar-
anteed under the following
conditions.
• A computer that has been
updated from Windows 95
to Windows 98
* This USB driver does not run
under Windows 3.1, Win-
dows 95 or Windows NT.
Macintosh
• Mac OS 8.5 or higher,
Mac OS 8.1 with USB
system extentions (iMac
update 1.0 is required)
• Power PC G3
• CD-ROM drive (for instal-
lation)
• Keyboard and mouse or
equivalent input device
• Available USB port
* The USB driver may not run correctly under certain hard-
ware configurations.