Casio QV-8000SX - Manual (Page 101)

E-101
CONNECTING TO OTHER EQUIPMENT
USB Port Connection
IMPORTANT!
• Plug the USB connectors into the ports as far as they
will go. Incorrect connection can result in improper op-
eration.
• Turn off the camera before connecting the USB cable
to it.
• The camera is not supplied power by the USB cable.
Be sure to use the optional AC adaptor to power the
camera whenever using a USB cable connection.
• Never disconnect the USB cable while a data commu-
nication operation is in progress. Doing so can corrupt
memory data.
Data Transfer Cable Connection
You can use the Data Transfer Cable to connect to your per-
sonal computer through the camera’s DIGITAL terminal.
Then you save images on your computer’s hard disk using
the Photo Loader application.
• See the separate installation manual for information about
how to install Photo Loader on your computer.
Windows 95, 98, NT Workstation 4.0
The Data Transfer Cable can be connected to an IBM PC/AT
or compatible that is equipped with a D-Sub9 RS-232C ter-
minal.
Digital camera
RS-232C terminal
(D-Sub 9-pin) Data Transfer
Cable
DIGITAL terminal
Computer
USB port
Large
Digital camera
Camera USB port
Small
USB cable