Casio V-N500 - Manual (Page 15)

E-13
Operating Precautions
Your Paper Writer and its options are precision. Improper operation or rough handling
can cause problems with data storage and other problems. Note and observe the
following precautions to ensure proper operation.
Do not leave dead battery pack in the Paper Writer for a long period.
Dead battery pack can leak, leading to malfunction and damage to the Paper Writer.
Stop or avoid using the Paper Writer and its options in areas and conditions
subject to the following.
— Large amounts of static electricity
— Extreme heat or cold or humidity
— Sudden temperature change
— Large amount of dust
— After large amount of rain or water falls on the Paper Writer
— Pressing the screen or buttons with excessive force when using in the rain
Always use your fi nger or the dedicated Digitizer Pen when using the touch
panel. The use of implements other than your fi nger or the dedicated Digitizer
Pen could damage the touch panel and/or cause malfunctions.
Do not use the Digitizer Pen when your hands are wet.
Do not use volatile chemical substances such as thinners, benzene or toiletries to
clean the Paper Writer.
When the Paper Writer is dirty, wipe it clean with a soft, dry cloth. Rubbing with
excessive force could scratch the display.
The power-supply terminals and charging terminals should be cleaned from
time to time using an implement such as a dry cotton bud.
Soiling on the terminals may cause connection defects.
Take care when using chemicals.
Applying thinners, gasoline, kerosene, solvents or oils, or substances such as cleaners,
adhesives, paints, medications or toiletries that contain those materials, to the plastic
case or cover may cause discoloration or other damage.
Allowing the communication/power supply terminals become wet can cause
an electric shock or fi re. In addition, if the terminals become soiled, contact
may be impaired resulting in poor charging. This may also prevent successful
communication. For reasons of safety and maintaining charging battery pack(s)
in optimum condition, clean the communication/power supply terminals by
wiping with a dry cloth or cotton swab after disconnecting the AC adaptor.
•
•
•
•
•
•
•
•