Casio V-N500 - Manual (Page 205)

E-203
Connecting the Cradle-type Battery Charger Power Supply
Use the optional AC adaptor (AD-S36120A-N) for the power supply of the Cradle-type
Battery Charger.
1. Plug the AC adaptor into the AC adaptor jack on the back of the Cradle-type Battery Charger.
DC IN 12V
2. After connecting the power cable to the AC adaptor, plug the other end of it into an
electrical outlet.
3. Turn on the power switch on the right side of the Cradle-type Battery Charger. The
power indicator LED on the front of the Cradle-type Battery Charger lights red.