Silvercrest SCAA 5.00 A1 - Manual (Page 260)

SilverCrest SCAA 5.00 A1
258 - English
Customising the auto power-off delay
This menu allows you to customise the automatic power-off delay. You can get the
camcorder to power off automatically after a certain time to save battery. If no buttons are
pressed during the preset time, the camcorder powers off automatically. To adjust the
automatic power-off delay, proceed as follows:
 Press the On/Off/Mode button [2] multiple times to select the MORE menu and then
press the record button [9] to confirm.
 Press the On/Off/Mode button [2] multiple times until the AUTO OFF menu is
highlighted. Press the record button [9] to open the AUTO OFF menu.
 Press the On/Off/Mode button [2] to select an option. The following settings are
available: “1 MIN“, “3 MIN“, “5 MIN“, “10 MIN“, “30 MIN“, “60 MIN“ and “OFF“.
Select a delay time after which the
camcorder powers off automatically if no
operation has been made in the meantime.
Select “OFF” to disable the auto power-off
function.
 Press the record button [9] to confirm your selection.
 To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.