Silvercrest SCAA 5.00 A1 User Manual
Page 263
SilverCrest SCAA 5.00 A1
English - 261
After the remote control has been successfully connected to the camcorder the red
remote control LED will light up shortly.
To exit the MORE menu, press the On/Off/Mode button [2] multiple times until the EXIT
item is highlighted and then press the record button [9] to confirm.
Now you can control your camcorder via the remote control. Press the [circle icon] button on
the remote control to start or stop a video recording. Press the [camera icon] button on the
remote control to take a picture. You can wear the remote control comfortably like a watch
on your wrist giving you convenience and flexibility for all your activities.
To control photography via the remote control you first have to set the
camcorder to the desired mode (Photo, Burst, Time-lapse or Self-timer). In
time-lapse mode, however, the remote control allows taking one picture
only. To use the remote control to record videos, set the camcorder to
Video mode. In Video mode you can even take picture by pressing the
[camera icon] button on the remote control.
The remote control is water-resistant up to a depth of 60 m. To guarantee its water-
resistance, do not use the remote control for longer than 60 minutes under water at a time.
The water-resistance applies to salt and fresh water only. It does not apply to any cleaners,
chemicals, solvents or water in public swimming pools. Liquids of this kind must be wiped off
the remote control immediately. Only use the remote control in water of temperatures of
between 0°C and 35°C.